Grinding Production Line

grinding mill

Grinding Production Line

Grinding plant consists of mainframe, speed reducer, powder separator, blower, bag filter, pipes, cyclone, motor, etc. The peripheral equipments are jaw crusher, bucket elevator, feeder, hopper, electric control panel, etc. Grinding mill can grind all kinds of non-flammable and non-explosive minerals with Moh’s hardness lower than 9 and humidity less than 6%，and is widely used in metallurgy, manufacture of building materials, chemical industry, mining industry, etc.

Working Principle

Large materials are crushed by Jaw crusher to the needed sizes firstly. Then the materials are elevated to storage hopper by bucket elevator, Thirdly, the materials are fed into the grinding chamber for grinding by vibrating feeder equably and continuously.

The powder after grinding goes upwards together with the airflow, after separated by powder separator, those which can meet the fineness requirement enters into the cyclone powder collector through pipe together with the airflow, and then discharged from the discharge valve as final products. The airflow is sucked into centrifugal blower through wind recycling pipe at the upper part of cyclone powder collector. The mainframe is driven by the speed reducer through the central axis in the mill.

The stand connected with the upper part of central axis, at the stand, rollers are set and by which the vibrating pivot formed. Below the stand and rollers there is shovel system. Materials are fed into the space between rollers and shovels when they are turning, and then be grinding by the pressure produced when rollers are turning, thus powder is made.