The installation and maintenance of pew jaw crusher

Pew jaw crusher adopts the most advanced international crushing technology and manufacturing level, is more hard, strong abrasive materials are broken when the preferred efficient products.  The maintenance of the machine is an extremely important regular work, it should be and the operation and maintenance of extremely close cooperation, should have full-time staff on duty checks. 

Installation commissioning

1. on the basis of the device should be installed in a horizontal concrete, land bolt is fixed.

2. when installation should pay attention to the main body of vertical and level.

3. check each part after installation bolt fastening, the presence of loosening and host storehouse door whether such as welcome to tighten.

4. according to the equipment power configuration of power and control switch.5. check finished, empty load test, the test can be normal production.

Maintenance of machine

1.All the load bearing for machine, so good lubrication for the bearing life has a lot to do, it directly affects the service life of the machine and operation rate, and thus require lubricating oil must be injected clean, seal must be good, the machine's main oil include the rotation bearing , roll bearing , all the gear bearing, sliding plane and activities.

2.the tire of the newly installed prone to loosening should be check regularly.

3. pay attention to each part of the machine whether it working normally.

4. pay attention to check the easy wear parts wear degree, attention to replace the worn parts at any time.

5. put activity unit chassis plane, should be out dirt and other material to avoid activities when machine can't broken material bearing can't move on the chassis, so that a serious accident.

6. bearing high oil temperature rise, should immediately stop to check the reason.

7.the rotation gear in sound operation, if there is impact should immediately stop check, and remove.